HDPE Pipes

IS Standards: IS 4984 specifications

Product Introduction:

We are considered a prominent HDPE Pipes Manufacturer, Our HDPE Pipes are manufactured using High Density Polyethylene that ensures their flawless performance and long functional life. These pipes are quite useful for carrying potable water, slurries, hazardous wastes, wastewater, cables, chemicals and compressed gases as well as oils. Moreover, these are highly demanded for landfill gas extraction and cable ducting.

Even in heavy–land areas, where only the strongest –galvanized iron, cement and asbestos survive; plastic, in the form of High Density Polyethylene (HDPE) has scored beyond doubt.

Hydrotech HDPE Pipes are extremely useful in Water Supply, Bore Well, Sprinkler, Lift Irrigation, Drip Irrigation, Pesticide Dispersal, Cable Ducting, Sewerage/Drainage, Natural & other gases etc, in urban and rural areas. They are also useful- for conveyance & flow applications in Chemical/Processing Industries, Telecommunications, Vegetable Oils, Fruit Juices, Dairies and other liquids & semi-liquids including Acids, Alkalis & other corrosive chemicals.

 

Range:

Our current range of HDPE pipes are available in sizes 20 to 200 mm OD pressure rating from PN-2.5 to PN-12.5 conforming to IS 4984:1995 as per required application.

 

Size:

mm (in)

20

(1/2)

25

(3/4)

32

-1

40

(11/4)

50

(11/2)

63

-2

75

(21/2)

90

3

110

4

140

5

160

6

180

7

200

8

250

10

 

Application:

  1. Chemical / Processing Industries:Not affected by acid and alkali
  2. Water Supply :Smooth continuous flow of water due to smooth inner surface
  3. Drainage & Sewerage :For carrying Soil, Waiste from the SWR Drainage System to appropriate drains or sewers through an underground network of pipes
  4. Underground or open pipeline
  5. Telecommunication and cable ducting
  6. Main line for sprinklers/drip pipeline
  • Irrigation and sprinkling system.
  • Effluent Lines.
  • Ventilation of Corrosive Gases.
  • Relining of Old Sewers.
  • Horticulture & Green House Technology.
  • Industries
  • Houses
  • Mines
  • Agricultural sector

 

Advantages/Features:

 

  1. Corrosion Resistant : 
    HDPE pipes do not rust rot or corrode. HDPE is one of the most chemically inert of all plastics and therefore is extremely chemical and corrosion resistant.
  2. Combination of Strength & Flexibility :
    HDPE has low notch sensitivity and high tear strength At the same time, being flexible, HDPE performs well in both high cover and low cover applica­ tions. It’s unique ability to support and distribute live and dead load enables it to meet almost every installation conditions.
  3. Installation Ease :
    Holding and installation cost is considerably reduced due to light weight feature while long lengths reduces jointing and fitting cost for e.g. Sizes upto 110mm pipe is available in coil form of 250-500 metres. Coil lengths can be increased in case of sizes from 20mm to 50mm OD.
  4. Chemical & Abrasion Resistant:
    HDPE is one of the most chemically inert of all plastics and with high resistance to abrasion. These two characteristics give HDPE pipe a significant long term advantage.
  5. UV Resistant:
    Black HDPE contains approx. 2.5% ± 0.5% carbon black and can be safely stored and installed in non – covered areas.
  6. Easy Joining:
    HDPE could be joined both mechanically by Flange Joint or Butt Welding method at site with HDPE Couplers/Sockets.

 

Pressure Rating: 
HDPE pipes are available in a range of pressure ratings from PN 2.5-4-6-8 10-12.5 and 16(PN stands for Kgf/cm2).